CHALLENGER Premium Cleaner/Degreaser Concetrate Gallon
CHALLENGER CONCENTRATED DEGREASER Cleans Walls, Floors, Doors, Windows, Concrete, Tile, Grout, Siding, Outdoor Furniture, Grills, Engines, Heavy Equipment, Auto, Waste Containers... Cleans Soot, Grease, Oil, Dirt, Paint, Mildew Stains.
Challenger PC-737 is a strong concentrate that can be diluted with water. When diluting, your best guideline to follow is “the greasier the surface the more Challenger you’ll need in the mix.” To apply Challenger: First spray the surface to be cleaned with Challenger. Give the Challenger a little time to penetrate the grease and grime. Then rinse well with water (preferably hot or warm, but cold water also works well).
INTERIOR USES
Tile and Linoleum Floors: For most tile and linoleum floors, a solution of 25% Challenger and 75% water will work well. If floors are waxed, test the dilution to make sure it is not removing the wax. If you want to remove the wax, use a stronger dilution, then rinse.
Fireplace Doors: Spray Challenger full strength. Allow to penetrate for 1 to 2 minutes. Rinse with warm water.
Walls: Wash walls with a solution of 10% Challenger and 90% water. Also excellent as a wall wash before painting. No rinsing necessary. Very greasy walls, such as restaurant kitchens, require a stronger mixture such as 50% Challenger and 50% water or maybe stronger. Always test Challenger on painted walls before using.
Desks, Tables, Vinyl Chair Seats, File Cabinets, etc.: If desks and chairs are extremely dirty, use a solution of 50% Challenger and 50% water, then rinse with water. If used on wood, use a mild solution of 20% Challenger and 80% water and apply with a soft cloth. Rinse surface with clean, damp cloth. Always test Challenger on wood before using.
Windows: Use 10% Challenger and 90% water. Do not rinse.
Sinks and Showers: Spray full strength directly on surface. Allow Challenger to work for 1 to 2 minutes. Rinse with warm or cold water. Rinse thoroughly before entering the shower or tub to prevent slipping.
Grout: A 50% mixture of Challenger and water cleans grout. Test first, if the grout is sealed — Challenger could remove the sealant.
Magic Marker and Spots: Spray with 50% Challenger and 50% water. Use a sponge and rinse with water. Test Challenger on carpeting before using.
EXTERIOR USES
Concrete Surfaces / Garage Floors: Use full strength on driveways and sidewalks. Allow Challenger to work 5-10 minutes. Flush with a pressure washer or hose, with warm or hot water.
Aluminum Siding: Spray the siding with 25% Challenger and 75% water. Rinse the water using a pressure washer or hose. Test Challenger on siding before applying. Rinse from the bottom up to prevent streaking.
Outdoor Furniture (man-made materials): Spray the furniture with a 50% mixture of Challenger and 50% water. Rinse with water by hand or hose.
Barbeque Grills: Spray Challenger full strength onto grilling surfaces and allow to work for 1-2 minutes, then rinse well. To degrease exterior surface, use a 50% mixture of Challenger and water. Rinse well.
Lawn Mowers and Golf Carts: Use a dilution of 25% to 50% Challenger depending on the amount of grime on the surface. Always test painted surfaces in an inconspicuous place first. Allow Challenger to work for 1-2 minutes then rinse with warm or cold water.
EQUIPMENT AND OTHER INDUSTRIAL APPLICATIONS
Air Conditioning Coils: Spray with 50% Challenger and 50% water. Flush with water.
Heavy Equipment, Trucks, Forklifts, and Air Compressors: Exterior Surfaces: 25% Challenger and 75% water. Flush with water.
Engines: Use full strength. Allow Challenger to work for 10-15 minutes, then flush with water. Warehouse Floors: Use full strength on concrete. Allow Challenger to work for 10-15 minutes. Flush with a pressure washer or hose.
Restaurant Filters: Apply Challenger straight and allow Challenger to work for 10 minutes. Then flush with hot water using a pressure washer. If filters are extremely greasy, spray Challenger on filters and then place in a plastic bag for one hour before flushing with water.
Garbage Cans and Dumpsters: Spray Challenger full strength or dilute to 75% Challenger and water. Rinse with water using a pressure washer or hose.
Helpful Hints
For really tough jobs, such as baked on grime, place the item in a sealed plastic bag overnight. When working with fiberglass, wet the fiberglass first then apply the Challenger solution. Don’t be afraid to experiment. A 50/50 mixture works wonders on white wall tires, grease spots on clothes, and cleans pitch on saw blades.
Here at Mullers, we recommend this cleaner for cleaning your cabinets, trim, doors, and walls before painting. Please follow above dilution rates and always test an area before washing and rinse after cleaning to allow paint to adhere to surface.
Product Use and Safety Information
